top
Yongkang Puli Caster Manufactory
新闻分类
联系我们
永康市方岩浦力脚轮制造厂
地址:中国浙江省永康市江南街道
外贸部:
手机:13705898931
电话: 0579-87530898 87530896
传真: 0579-87157659
E-mail: 01@puli-caster.com
内贸部:
手机:13857953186
电话: 0579-87530896
传真: 0579-87530897
E-mail: 02@puli-caster.com
网址: http://www.puli-caster.com
The casters of maintenance method(人气:) 
来源: 作者: 发布时间:2012-12-10
字号: T|T

User wheels the proper maintenance and operation of the equipment responsible. To avoid improper use or equipment. To overload, the heavy special light on the car. High speeds on rough roads or heavy objects hit pressure wheels cause the wheels or equipment damage., Regularly check:
Bracket and fasteners: loose axle nut is tightened and check welds or support plates have been damaged. Overloading or impact will cause the bracket to distort. The twisted bracket so overloaded tilt pressure in the individual wheel and cause the wheels to premature failure. If the plug rod Casters, tighten the nuts firmly clenched and equipment mounting bracket is not bent and the plunger is installed correctly.

  The installed casters should be used when locking nut or locking gasket. The installation the expansion plug rods sexual casters To guarantee the plunger firmly installed in the kit. Lubricated regularly lubricating the wheels and bearings can be used for a long activities. Grease applied to the axle seals and roller bearings, friction parts to reduce friction and make the rotation more flexible. Every six months under normal circumstances, once lubrication, the car should wheel lubrication monthly cleaning, the wheels visually check wheel wear. The wheels turning poor with thin red rope and other debris. Anti-wrapped cover the wound can stop these debris.

  Casters is too loose or too tight is also another factor, replacing defective wheels / casters to avoid instability in the rotation. Inspection and replacement wheels shall ensure tight axle with lock washers and nuts. Axle loose spoke bracket will lead to friction and stuck. Should be available to replace the wheels and bearings to avoid production losses.
Casters if the active steering is too loose to be immediately replaced. Caster center rivet nut fixed to guarantee its furrowed firmly.

  If the activities of the steering can not rotate freely should check the ball at any corrosion or stolen goods. If equipped with a fixed Casters, shall ensure that the wheel bracket without bending phenomenon.

 

关键字:

bottom
底部
浦力首页 | 轻型脚轮 | 工业脚轮 | 产品展示 | 关于浦力 | 荣誉证书 | 新闻动态 | 常见问题 | 在线反馈 | SiteMap | Login
Keywords: 轻型轮厂家工业轮批发中型轮系列重型轮系列
永康市方岩浦力脚轮制造厂 Copyright:2012-2012 地址: 中国浙江省永康市江南街道
技术支持:东方五金网
留言板